Huawei B200

Alt

STEP 1


Just like the Huawei B933, the LED indicators for this modem are placed on the side panel. Check out the LEDs' functions as indicated in the diagram below:

Alt

STEP 2


The images below show the front and back panel of B200. The power switch is located on the front panel; on the side back panel is where you'll find the antenna port, LAN port, and the telephone port.

Alt

STEP 3


Open a web browser and enter the modem's default IP address: "192.168.1.1". On the Home Page, click the ‘Basic Status' Menu then refer to ‘WAN Status' to get a quick look of your connection's current status.

Alt
STEP 4

To see your SIM card status, just click the ‘Basic Status' Menu then click on the ‘Advanced' link under the WAN Status.
Alt

STEP 5


To get the signal readings, click on the ‘Basic Status' Menu and refer to the ‘RSSI' and ‘Ec/lo'.

Alt

STEP 6


If you want to check your connection status, simply click ‘Connection' and look at the ‘PPP Status'.

Alt

LAST STEP


To access the advanced setting...

Alt

DEAD AIR & BUSY TONE

Help! Everytime I attempt to make a call, all I hear is a busy tone.Is the call local or National Direct Dialing (NDD)? If NDD, double check if your phone lock is unlocked. If it's locked, just call our hotline if you wish to add an NDD access.If your phone lock is active but locked, then you should unlock it. If it's both active and unlocked, call our hotline and ask for a test call.If it's a local call, validate if the call is part of Globe's Interconnection list.

Top