Sorry, you need to enable JavaScript to visit this website.
Prolink Hurricane 6300G Modem Configuration Guide | Help & Support | Globe

Prolink Hurricane 6300G

Modem.png

STEP 1


Open a web browser and enter your router's IP address: 192.168.1.254. If a window prompt appears, type "admin" in the username and password fields.

1.jpg

STEP 2


In the Quick Start Menu, click the ‘Run Wizard' button for a quick setup.

2.jpg

STEP 3


Click ‘Next'.

3.jpg
STEP 4

To begin the quick set up, first, you must set your new password. Remember that your default password is ‘admin'.
4.jpg

STEP 5


Choose your Time Zone. Make sure you select the correct time zone then click ‘Next'.

5.jpg

STEP 6


Next, set your Internet Connection. Select ‘PPPoE/PPPoA' then click ‘Next'.

6.jpg

STEP 7


Supply all the necessary information for all the other fields. Refer to the values to be keyed in the image below:

7.jpg

STEP 8a


Click ‘Next'.

8A.jpg

STEP 8b


After closing the window, don't forget to restart your ADSL router for the changes to take effect.

8B.jpg

STEP 9


Click the ‘Interface Setup' to be found in the Main Menu, select ‘Internet', and then supply all the necessary information. Be sure to scroll down the page and key in the required info to complete the setup!

9.jpg

STEP 10


After supplying all the required information, click ‘Apply'.

10.jpg

STEP 11


In the Interface Setup Menu, select ‘LAN'. Provide all the needed information, and then click ‘Apply'.

11.jpg

STEP 12


In the Interface Setup Menu, select ‘LAN'. Provide all the needed information, and then click ‘Apply'.

12.jpg

STEP 13


Under the Maintenance Section, click ‘SysRestart'.

13.jpg

LAST STEP


Select ‘Current Settings' and click ‘Restart', then wait a few seconds for the setup to be recognized.

14.jpg
Top