Prolink Hurricane 9300G
STEP 1
Click "Start" button, then click "Run"
STEP 2
A pop-up menu will appear. It will ask you to type the name of a program, folder or document.
STEP 3
Type "cmd", then click "OK" button
STEP 5
Type in "ipconfig" and then press ‘Enter'.
STEP 6
Type "ping 192.168.1.254" then ‘Enter'. Once done, close the DOS prompt window.
STEP 7
Open your web browser
STEP 8
In the Address bar, key in "192.168.1.254". A pop-up menu will appear on your screen, asking for a username and a password.
STEP 9
Type "admin" in the username and password fields. Click "OK".
STEP 10
Click the ‘Quick Start' button that can be found on the upper left side of the page.
STEP 11
Fill in the boxes with the correct info as indicated, then click ‘Apply'.
STEP 12
Click "OK"
STEP 13
Click the ‘SAVE CONFIG' button, located below the page.
STEP 14
Click "Apply"
STEP 15
Click "OK"
STEP 16
Once successful, restart your router. The ‘Restart' button can be found at the lower part of the page.
STEP 17
Click ‘Restart'. Then wait for a few seconds.
STEP 18
Wait for a few seconds
STEP 19
Click ‘Status' to check if your PPP connection and Port has already been connected. That's it!
