STEP 2e

Advance Menu

STEP 2f

Admin Menu

STEP 3

For PPPoE setting, simply click ‘Quick Setup' Menu then enter your Globe Broadband username and password.

STEP 4

Click Commit and Reboot.

STEP 5a

Please wait until it goes back to the Home Page.

STEP 5b

Here's how the Home Page looks like, for your reference.

STEP 6

Set up your PPPoA by simply clicking the ‘Internet Interface' Menu, then ‘ATM Settings'.

STEP 7

Put in "35" as the VCI Value, and then click the ‘Encapsulation' and the ‘Channel Mode'.

STEP 8

After selecting the ‘Channel Mode', ‘Enable NAPT' will automatically be checked.

STEP 9

Enter your Globe Broadband Username and Password then select ‘Continuous' as the Type.

STEP 10

Please leave other entries as they are when you opened the page, then click ‘Add'.

STEP 11a

Scroll down to the bottom of the page and check if the settings were set properly.

STEP 11b

Check if the settings were set properly.

STEP 12

Click the ‘Admin' Menu then select ‘Save and Reboot'.

STEP 13a

Click the ‘Commit and Reboot' button afterward.

STEP 13b

Click OK

STEP 14

Wait awhile until it returns to the Home Page.

STEP 15

If you're back in the Home Page, scroll down to check if you have already established Internet Connection.

STEP 16

If you see the ‘Disconnect' button, it means that you're already connected to the internet.